DIY Electric Fencing Installation

If you have been thinking about doing a DIY electric fencing installation, there are a few things that you’re going to need to do in order to ensure that you’ve got everything that you need and that it’s done correctly. In this article, we’re going to give you some tips and hints that you can use in order to make sure that your DIY electric fencing installation goes off without a hitch.

  • Make sure that you have the grounding posts and wires installed properly. You need to put the grounding posts and wire near the energizing, mainly because you want to make sure that there isn’t an electric shock that can cause issues near the energizer. It’s a lot safer for you to have it grounded, and it will make the fence work a lot more effectively.
  • There are a lot of ways that you can install your fence posts. The most useful way to do this is by using a string to mark the posts and then put them in the ground with a hole digger or shovel.
  • Usually, the post should be just as deep as you want the fence to be high. For example, if your fence is going to be 6 feet in height, you will want 6 feet of post in the ground, at least at the corners. The corners take on the most strain, so having them the most secure is vital.
  • If you’re going to be putting a lot of strain on the fence at any point in time, you want to make sure that the posts that will be taking the brunt of it are more secure. Braces, usually made with anchors or cement footings, will help to keep them in place and give them a little more stability. The braces can be all different shapes and sizes, so you just have to find the ones that are going to give you the most stability.
  • You need to keep the electricity in your wires, and you don’t want it to get into the posts. Because of that, you want to make sure that you install specific insulators which will help you to keep the electricity off the posts. Most times, you can get the insulators with the wire that you’re buying at any point in time.
  • Finding your wire ahead of time will make it easier for you to install everything. There are four different types of wire that you can choose from, so do your research to learn about the types that are out there and how each of them can make a difference with the tasks that you want your fence to complete over time.
  • Don’t be too impatient when you’re putting your fence up. Since you want to make sure that every little part is in where it needs to be. On top of that, you also want to make sure that you measure everything correctly before you start to purchase any of the products that you want to utilize. Work with an installation specialist to make sure that you’re getting the right supplies and to go through your shopping list without a lot of stress and strain in the long run.

Before you start a DIY installation, you will want to make sure that it’s something that you’re allowed to do. Contact your local representatives and take a look at the laws and regulations related to installing your own fence. That way, you can stay within regulations and you don’t have to worry about your hard work going to waste after you’ve completed it.